With Paint For Pros BeamerPaint, any (smooth) surface can easily be made suitable for beamer projection. This paint can also be applied to
large and unusual surfaces, which can then be converted into a high quality presentation wall.
PERFORMANCE
BeamerPaint consists of a primer and a finish. After applying two layers of BeamerPaint Primer, the surface has to be optimised with our
BeamerPaint Finish. This finish provides a hard but smooth top layer,which makes the projection sharp and rich in contrast.
USAGE
Before the projector paint can be applied, the surface must be stable (weight bearing), dry and clean. The subsurface must comply with
the requirements set for gypsum substrates (level 4), or at least with a comparable classification.
The paint can easily be applied with a paint roller. The primer must dry for at least 5 to 6 hours after the first layer has been applied. Before the
finish can be applied, the same drying time must be allowed.

APPLICATION

• Surface and air temperature should be between 16-26°C / 60-80°F.
• DRYING TIME
• TOUCH DRY After 2-3 hours @ 20°C and 65 % relative humidity
• RECOATABLE After 5-6 hours @ 20°C and 65 % relative humidity
• READY TO USE After 48 hours @ 20°C and 65 % relative humidity
• PACKAGING 2 L Primer, 1 L Finish 
• SHELF LIFE :Minimum 12 months, if stored in a cool dry area between temperatures of 5-35°C /40-75°F and keep out of direct sun light, sealed tightly.
• TIP
• Rollers and paint trays which have been used can easily be cleaned with water immediately after using BeamerPaint.
• SHEEN Satin finish
• COLOUR White
• DENSITY Basecoat 1,45g/cm3 - Finishcoat 1,02 g/cm3
• FILM THICKNESS Ca 200 μm dry film
• THEORETICAL COVERAGE Base: 5 m²/L, one coat. Finish:10 m²/L, one coat
• VISCOSITY Ready for use. If required, only solve primer with a maximum of 5% clear water.
• SPRAYABLE Yes
• VOC EU limit value for this product (2004/42/EC, cat. iSB,2010): 30 g/l. This product contains: <1 gr./L VOC’s.

Click to view Technical Data Sheet

Click to view Safety Data Sheet for Beamer Paint Base

Click to view Safety Data Sheet for Beamer Paint Finish

INDEMNITY CLAUSE 

Do it Yourself (DIY) Painting

This notice specifies that the Individual will take full responsibility when He/She does the painting/application of the paint.

The Buyer/Purchaser

Undertake to Indemnify that JUZPAINT (SEA) PTE LTD, her manufacturer and agents against all liabilities for claims, demands, suits, actions, cost charges, expenses and damages.